Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Millbrae, CA
Chimney inspection in Millbrae starts with a simple question: what is actually inside the flue of a house that may have been burning wood since the 1920s? Millbrae’s housing stock runs from 1920s bungalows near downtown to 1960s ranchers along the El Camino corridor and newer infill, and many of those chimneys still have original masonry fireplaces and clay tile flues that have never been relined. Add the marine layer that keeps chimneys cold and damp through the cool, foggy summers and wet winters, and you get creosote that is more corrosive and harder to remove than what we find inland. One inspection covers your flue, liner, crown, and firebox. Call (866) 885-7416 to book one.
Why Millbrae Homes Are Different
Most Millbrae homes are single-family, built between the 1920s and 1960s. That age matters more here than it would in a drier climate. Millbrae’s foggy summers and wet winters keep chimneys cold and damp, so creosote builds up in a form that is more corrosive and harder to remove than the dry, flaky deposits we see inland. The marine layer and occasional winter storms also drive water into uncapped flues, which speeds up masonry deterioration from the inside out.
Then there is the housing stock itself. Many original brick fireplaces and unlined or clay tile flues in Millbrae predate modern seismic bracing, and decades of coastal moisture show up as spalling on the brick and mortar. We also find a lot of “sleeping” chimneys in the older tracts near downtown and the El Camino corridor – fireplaces sealed off during 1970s remodels without proper capping. Those flues now harbor birds, rats, and moisture damage, and they need a full sweep and camera inspection before anyone lights a fire in them again. None of this is unusual for a Millbrae chimney. It is what the local climate and building era produce, and it is exactly what an inspection is for.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Millbrae Services
Most Millbrae homeowners call us about two things: getting the flue cleaned and getting what the inspection finds fixed.
Chimney Sweep in Millbrae
Sweeping a Millbrae chimney means more than running a brush down the flue. In a damp, cold coastal flue, creosote binds to the clay tile and can glaze hard, so we use the right tools for the deposit we actually find rather than a one-size brush. A sleeping chimney hidden behind a 1970s remodel gets the same treatment as an active one: a full sweep, a camera look at the flue, and a conversation about whether it is safe to reuse. We show you what we find before we recommend anything. For the full scope of a cleaning, see Chimney Sweep in Millbrae.

Chimney Repair in Millbrae
Repair work in Millbrae usually centers on water damage and age. Uncapped flues take in fog and rain, mortar joints soften, and brick faces spall after decades of it. Some chimneys need a rebuild at the crown or a new cap. Others qualify for HeatShield ceramic resurfacing, which restores a damaged flue from the inside and avoids the cost and disruption of pulling the whole liner. When a full reline is the honest answer, we fit DuraFlex flexible liner systems for older or non-standard configurations. Repair or restore – we will tell you which approach fits your chimney. More detail lives on Chimney Repair in Millbrae.

Chimney Inspection in Millbrae

Chimney Inspection in Millbrae is how you find out what a 1920s or 1960s flue is actually doing after decades of coastal damp and earthquake-era construction. The foggy summers and wet winters here keep chimneys cold, so creosote clings harder and water finds its way into uncapped flues, while many original clay tile liners have never been relined at all. An inspection tells you which of those problems you have before you burn another fire. This is the core of the Chimney Inspection work we do, and it is the first thing we recommend to any Millbrae homeowner who has not had the flue looked at.
Chimney Flue Inspection
Signs you need it
You need a flue inspection if you smell smoke in the room when the fireplace is lit, if the fire draws poorly on a foggy day, or if you have never had the inside of the flue looked at since moving into an older Millbrae home.
What it costs in Millbrae
A chimney inspection in Millbrae typically runs $150 to $400, and a Level 2 inspection with camera runs $250 to $600, with the written estimate setting the final price.
How we do it
We run a camera down the flue, check the liner joints and cap, and photograph what we find so you can see the same thing we do before we recommend any work.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is the right call if you have changed appliances, relined or resurfaced nothing since a remodel, or bought a Millbrae home whose chimney history you cannot verify.
What it costs in Millbrae
Expect $250 to $600 for a Level 2 chimney inspection in Millbrae, which includes a video scan of the full flue length; the written estimate confirms the final figure.
How we do it
We camera-scan the entire flue from top to firebox, check accessible portions of the chimney exterior and attic, and document liner gaps, spalling, and any signs of a prior chimney fire.
What Chimney Inspection Costs in Millbrae
| Item | Typical range in Millbrae |
|---|---|
| Standard chimney inspection | $150 – $400 |
| Level 2 inspection with camera | $250 – $600 |
| Inspection plus sweep, booked together | $250 – $650 |
Do I really need an inspection if I only burn occasionally?
Yes. Occasional burning still leaves creosote, and in Millbrae’s damp climate that creosote turns corrosive over time. A camera inspection shows whether the flue is sound before you light the next fire. Call (866) 885-7416 for an exact quote – estimates are free.
Can you inspect a chimney that was sealed off years ago?
Yes, and in Millbrae’s older tracts near downtown we often do. Sleeping chimneys sealed during 1970s remodels without proper capping can hold birds, rats, and moisture damage, so we sweep and camera-inspect before any reuse.
Brands We Service in Millbrae
Our repair and restoration work draws on a defined set of professional-tier chimney brands: DuraFlex flexible liner systems, HeatShield ceramic resurfacing, Gelco, and Copperfield. These are the same product lines used by certified chimney professionals, not generic substitutes. We match the fix to a proven, warrantied material, and when a part has to be ordered we tell you the turnaround before you commit. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Millbrae, CA
| Service | Typical range in Millbrae |
|---|---|
| Standard chimney inspection | $150 – $400 |
| Level 2 inspection with camera | $250 – $600 |
| Inspection plus sweep | $250 – $650 |
| Chimney sweep (creosote removal) | $180 – $450 |
| Chimney cap installation | $200 – $550 |
| Crown repair | $300 – $900 |
| HeatShield flue resurfacing | $1,200 – $3,200 |
| DuraFlex liner installation | $2,000 – $5,500 |
| Tuckpointing and masonry repair | $400 – $1,500 |
| Chimney fire damage assessment | $250 – $600 |
Prices climb in Millbrae when a job moves from cleaning into structural work: a spalled crown, a flue with multiple broken tile joints, or a chimney that predates seismic bracing and needs bracing added before a reline makes sense. We give you the full written estimate upfront, and that estimate sets the final price – nothing is added later without your approval.
Neighborhoods We Serve in Millbrae
We work throughout Millbrae, including the older tracts near downtown and along the El Camino corridor where sleeping chimneys and unlined flues are common, as well as the 1960s ranchers and newer infill on the city’s residential streets. Millbrae’s compact footprint and its position near SFO mean we can usually schedule a visit without much lead time. If your home is in the 94030 ZIP, you are squarely in the area we cover.
- Downtown Millbrae
- El Camino corridor
- Millbrae Meadows
- Millwood
- Rollingwood
Service Area – Cities Near Millbrae
Our Millbrae work sits inside a broader service area that covers the Peninsula and the coast. We also take chimney calls in San Bruno, CA, South San Francisco, CA, Pacifica, CA, and Brisbane, CA. Conditions vary from city to city – the fog is heavier on the coast, the housing stock shifts block by block – so we adjust the inspection and the recommendation to what your chimney is actually doing, not to a general rule. Call (866) 885-7416 to confirm your address and book a visit.
Serving Millbrae, CA – Our Local Coverage Area
We serve Millbrae and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Millbrae
Millbrae is a compact city with quick access from the El Camino corridor, so scheduling is usually straightforward. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 885-7416 and we will book you into the next opening.
Some structural repairs and relining work do require a permit in Millbrae, and the rules depend on the scope of the job. We tell you upfront when a permit applies and factor it into the written estimate before any work begins.
Yes. If your Millbrae home is in an HOA, exterior changes like a new cap or crown repair may need association approval first. We can document the condition with photos so you have what you need to submit, and we schedule around your approval timeline.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Millbrae Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Shane Norris"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Steven Chen"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Allen Wong