Chimney Company in San Bruno - One Flat Price, You See What We See

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 885-7416

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in San Bruno, CA

Most chimney work in San Bruno starts with an inspection, because the homes here are older than the people living in them. The typical hillside house was built between the 1940s and 1960s, with an original masonry fireplace and a clay-tile flue that has absorbed decades of fog and winter rain. We inspect that flue, the liner, the crown and the firebox in one visit, then tell you plainly what needs fixing and what can safely wait. Our technicians have up to 15 years of experience. Call (866) 885-7416 to book.

Call (866) 885-7416

Why San Bruno Homes Are Different

The marine fog layer sits over San Bruno longer than it sits over most of the Peninsula, and the winter rains arrive on top of it. That combination keeps masonry damp well into spring. Mortar joints soften, dampers rust shut, and creosote that would stay powdery in a drier climate glazes into a hard shell that takes real work to remove. Fireplaces here also sit idle for long stretches, because the summers are cool enough that people don’t need them, and that idle time is when birds nest and debris collects.

The housing stock shapes the work as much as the weather. Most of San Bruno is 1940s-1960s stucco and wood-frame single-family homes on small lots, many with the original clay-tile flue still in place. In hillside pockets like Crestmoor and the Burlwood area, split-level and ranch homes carry exterior chimneys on the windward wall, and after a Pacific storm those chimneys routinely come back with torn screens and debris packed against the crown. On the exposed ridgelines above Skyline Boulevard and in the older tracts near San Bruno Mountain, downdrafts can push smoke back into a room even when the flue is clear.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main San Bruno Services

Two jobs account for most of the calls we get from San Bruno homeowners, and they usually arrive together.

Chimney Sweep in San Bruno

A sweep here is mostly about glazed creosote. The damp air around 94066 lets soot and creosote cure into a hard, shiny layer that a brush alone won’t lift, so we assess the deposit before we start and choose the method that actually removes it. We protect the room, work the flue from top and bottom, and clean out the firebox and smoke shelf. If the firebox has sat unused through a few seasons, we clear the nest material and debris first. To book a chimney sweep, call and we’ll set a time.

Chimney Sweep in San Bruno

Chimney Repair in San Bruno

Repair in San Bruno tends to be moisture work: cracked crowns, crumbling mortar at the shoulder, rusted dampers, and occasionally a dislodged flue tile after a hard wind. We look at the whole assembly before recommending anything, then match the fix to the material. A qualifying flue may only need HeatShield ceramic resurfacing rather than a full liner, and older or non-standard chimney configurations often take a DuraFlex flexible liner where a rigid one won’t fit. When you need chimney repair, we show you the evidence behind the recommendation.

Chimney Repair in San Bruno
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 885-7416

Chimney Inspection in San Bruno

Chimney Inspection in San Bruno

Chimney Inspection in San Bruno answers a question a lot of homeowners here have never had answered: what condition is this flue actually in? Many people bought their house in the 1990s or 2000s and have never had the chimney looked at since. Add a damp coastal climate that ages mortar faster than inland air does, and a 1950s clay-tile flue can be quietly failing while the fireplace still draws fine on a calm night. Our Chimney Inspection covers the flue, liner, crown, damper and firebox in a single visit, so you get the full picture rather than one piece of it.

Fireplace Inspection

Signs you need it

You need a fireplace inspection if smoke rolls into the room instead of going up, if the firebox bricks show cracks or white staining, or if you’ve moved in and don’t know when the fireplace was last looked at.

What it costs in San Bruno

A standard fireplace inspection in San Bruno typically runs $125 to $275, and the written estimate sets the final price.

How we do it

We examine the firebox, damper, smoke shelf and the first few feet of flue by hand and light, check the firebox for cracks and gaps, and note anything that affects how the fireplace drafts.

Level 2 Chimney Inspection

Signs you need it

A Level 2 inspection is the right call after a chimney fire, a strong earthquake, a change of ownership, or any repair or liner change, since it’s the level that looks at the whole flue rather than just the accessible parts.

What it costs in San Bruno

Expect roughly $225 to $450 for a Level 2 inspection in San Bruno, with the written estimate confirming the price before we start.

How we do it

We run a camera down the full length of the flue, record the interior condition of the liner and joints, inspect the crown, cap and exterior masonry, and give you a photo report of what the camera saw.

Chimney Flue Inspection

Signs you need it

Ask for a flue inspection when the fireplace has sat idle for several seasons, when you’ve had birds or squirrels around the cap, or when a storm has knocked debris onto the roof.

What it costs in San Bruno

Flue inspection in San Bruno typically falls between $150 and $350, depending on access and whether camera work is needed, and the written estimate is the final word.

How we do it

We check the flue for obstructions, cracked or dislodged tiles, gaps at the joints, and any offset or size mismatch that would affect draft, then clear what can safely be cleared.

What Chimney Inspection Costs in San Bruno

These are typical ranges for inspection work in San Bruno. Every job gets a written estimate, and that estimate sets the final price.

Item Typical range in San Bruno
Standard fireplace inspection $125 – $275
Level 2 inspection with camera $225 – $450
Flue inspection $150 – $350
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 885-7416

Can a chimney inspection find damage the eye can’t see?

Yes. A camera run down the flue shows cracked tiles, gaps at the joints, and glazed creosote buildup that no one can see from the firebox. On San Bruno’s older clay-tile flues, that interior view is often the difference between a safe fireplace and a hidden problem.

How often should a San Bruno chimney be inspected?

Once a year is the standard, and it matters more here because damp air ages mortar faster than dry inland air does. If the fireplace has gone several seasons unused, book an inspection before the first burn rather than after. Call (866) 885-7416 and estimates are free.

Brands We Service in San Bruno

Our repair and liner work draws on professional-tier chimney materials: DuraFlex flexible liner systems, HeatShield resurfacing, Gelco and Olympia Chimney components. We stock nothing generic on principle, because a San Bruno chimney needs a part matched to it, not a substitute that happens to fit. Turnaround depends on the part and the job, and we’ll tell you the timeline in the estimate. You can see the full lineup on our brands page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (866) 885-7416

Pricing for Chimney Company in San Bruno, CA

Service Typical range in San Bruno
Standard fireplace inspection $125 – $275
Level 2 inspection with camera $225 – $450
Flue inspection $150 – $350
Chimney sweep (standard) $175 – $350
Chimney sweep (heavy glazed creosote) $250 – $500
Crown repair $300 – $700
Damper replacement $350 – $800
Mortar and masonry repointing $400 – $1,200
HeatShield liner resurfacing $1,200 – $2,800
DuraFlex liner installation $2,500 – $6,500

Price climbs in San Bruno when the flue is glazed, when access is awkward on a steep hillside lot, and when an exterior chimney has taken enough wind and rain to need masonry work alongside the liner. Our prices are quoted upfront in a written estimate before any work begins, and that estimate is what you pay.

Neighborhoods We Serve in San Bruno

We work across San Bruno, from the flat tracts near the El Camino corridor up through the hillside streets where exterior chimneys take the worst of the weather. Crestmoor and the Burlwood area keep us busy with split-level and ranch homes whose chimneys are exposed to wind and moisture. On the ridgelines above Skyline Boulevard and in the older tracts near San Bruno Mountain, we deal with downdraft problems and storm debris. Response times are generally similar across town, though the steeper hillside streets can add a little travel time.

  • Crestmoor
  • Burlwood
  • Ridgeline streets above Skyline Boulevard
  • Tracts near San Bruno Mountain
  • Neighborhoods around the El Camino corridor

Service Area – Cities Near San Bruno

San Bruno sits in the middle of our Peninsula coverage, so we also work the cities on every side of it. South of here we handle Millbrae, CA, and the same fog-and-masonry issues show up there. North of San Bruno we cover South San Francisco, CA, and down the coast we work Pacifica, CA, where ocean air is even harder on exterior chimneys. Inland and to the north, Brisbane, CA rounds out the area. Our home base of operations is Chimney Sweep Daly City, and we cover the surrounding Peninsula from there.

Serving San Bruno, CA – Our Local Coverage Area

We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in San Bruno

Ready to get started? Free estimates in San Bruno
Call (866) 885-7416

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What San Bruno Customers Say

★★★★★ 4.9 from 9+ reviews

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Shane Norris

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

- Steven Chen

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Allen Wong

How It Works in San Bruno

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in San Bruno. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7