Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Millbrae, CA
We provide independent Gelco service across Millbrae, CA – cap installation, cap replacement, multi-flue cap work, and the sweep and inspection that has to happen around them. The thing that makes our Gelco work in Millbrae different is the housing: much of the city’s stock went up between the 1920s and 1960s with original masonry fireplaces and clay tile flues, and the marine layer has been working on both the masonry and the metal ever since. If your cap is old, clogged, or you’re not sure it’s doing its job, call (866) 885-7416 for a free estimate. Our technicians have up to 15 years of experience. We’re an independent provider, not affiliated with or authorized by Gelco.
Why Millbrae Residents Choose Us for Gelco Service
Gelco is a well-known name in chimney protection – caps, multi-flue caps, and custom cap fabrication – and we see these installations on Millbrae roofs all the time. We’re not a Gelco dealer and we don’t claim to be manufacturer-trained. That independence is the point: when your cap needs attention, we diagnose what that specific cap actually needs instead of defaulting to a replacement path.
There’s a second reason Millbrae homeowners call us back. We handle all three phases of chimney care – inspection, sweeping, and repair – so nobody has to coordinate between a cap installer, a sweep, and a mason. One visit, one set of eyes on the flue, crown, flashing, and firebox together. You’ll see what we find before we recommend anything, and we’ll tell you plainly when a repair can wait.
We work with professional-tier product lines – DuraFlex flexible liners, HeatShield ceramic resurfacing, Olympia Chimney, Famco, Copperfield – which matters when a cap’s mounting surface has deteriorated and the fix touches the chimney top, not just the cap. Chimney work is all we do. Gelco expertise is part of that, and so is honest sizing of the job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Millbrae
- Corrosion at the mounting legs and screw points. Stainless Gelco caps on Millbrae’s foggy marine-layer chimneys corrode where they’re fastened, and once those points weaken the cap can lift or shift in winter wind. A shifted cap means rain and birds get straight into the flue.
- Screens clogged with soot, leaf litter, and pest debris. Bolted or friction-fit Gelco screens load up over time. On Millbrae’s “sleeping” chimneys – fireplaces sealed off in 1970s remodels – that clogged screen is often what a sweeper finds on the first visit, before anything can be reused.
- Rust-through on older galvanized caps. Galvanized and black-painted standard caps on 1920s to 1960s Millbrae bungalows rust through at the crown and mesh, dripping rust onto masonry that’s already spalling from decades of coastal moisture.
- Multi-flue caps working loose. A Gelco multi-flue cap sitting on an unbraced, pre-seismic-era chimney top can loosen as the mortar crown deteriorates, and the seal that keeps rainwater out of clay tile flues goes with it.
- Caps sealed over and never vented. A cap that sat undisturbed through a remodel can hide a blocked flue entirely. We pull the cap, sweep, and camera-inspect before anyone lights a fire.
Gelco Service in Millbrae: What Local Conditions Mean for Your Equipment
The older tracts near downtown and along the El Camino corridor tell the story better than anything else about this city. Those blocks were heavily remodeled in the 1970s, and a lot of fireplaces there were sealed off – capped, closed, and never properly vented. Decades later, the first visit to those homes is usually a cap-and-blockage investigation, not a routine sweep. The cap has been sitting on a flue nobody has looked down in forty-odd years, the screen is plugged, and the mounting legs have corroded from marine-layer damp.
Millbrae’s cool, foggy summers and wet winters keep chimneys cold and damp, which makes creosote buildup more corrosive and harder to remove than it is inland. Combine that with an uncapped or shifted flue and winter storms drive water straight into the masonry. That’s why we treat the cap as the first line of defense for the whole chimney. A sealed, blocked, moisture-damaged flue is a real safety item, not an upsell, and a trained professional should be the one to open it up and assess it.
Gelco Models & Products We Service in Millbrae
We service single-flue stainless steel Gelco caps, multi-flue or multi-port stainless caps, custom-fabricated caps built for oversized or irregular clay tile flues, and the galvanized or black-painted standard caps common on older Millbrae homes. Each type ages differently, and each gets a different conversation.
When it’s time to replace rather than repair, we match the cap to the flue and the chimney top, using quality stainless hardware that holds up to coastal air. We don’t stock or warehouse parts – we source what fits your chimney, and we tell you why we chose it. Custom fabrication is worth the expense only when a stock cap genuinely won’t seat.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Millbrae
Every job is priced by a written estimate after we’ve looked at the chimney, so the estimate sets the final price – not a phone quote. What drives the number: whether the cap can be re-secured with new screening and flashing or has rusted through, whether the chimney top needs crown or mortar work before a new cap will sit properly, and whether the flue itself turns out to be blocked or damaged.
- Inspection and sweep: quoted per chimney by written estimate
- Re-securing, re-screening, or re-flashing an existing cap: usually the cheaper route when the legs and mesh are sound
- Single-flue stainless cap replacement: quoted after sizing the flue
- Multi-flue cap replacement: quoted after the crown is assessed
- Custom fabrication for irregular clay tile flues: quoted only when a stock cap won’t seat
The estimate is free. Call (866) 885-7416 for an exact quote.
Serving Millbrae, CA – Our Local Coverage Area
We serve Millbrae and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Millbrae
Not until it’s been opened up and inspected. A cap that sat through a remodel can hide a blocked or moisture-damaged flue, and the screen is usually plugged. Once we pull the cap, sweep, and camera-inspect, we’ll tell you honestly whether the flue is safe to reuse. Call (866) 885-7416 for a free estimate.
The marine layer keeps the chimney top damp, and the mounting legs and screw points are where moisture sits longest. That’s the corrosion pattern we see most here, and it’s why a cap can loosen in winter wind.
Usually, yes, if the chimney top is sound enough to hold it. On pre-seismic-era chimneys the crown and mortar have to be checked first, because a multi-flue cap needs a stable base. We’ll assess the top before recommending anything.
Expect a cap-and-blockage investigation rather than a sweep. A typical Millbrae call like this involves pulling a long-untouched cap, clearing a clogged screen, sweeping, and camera-inspecting the flue, then checking the crown and flashing for water intrusion. Call (866) 885-7416 to book it.
Often it can be repaired. When the mesh and legs are sound, re-securing, re-screening, or re-flashing is usually cheaper than replacement. When the original has rusted through, a correctly sized stainless cap is a legitimate substitute.
Service Areas Near Millbrae
We also work in Daly City, Broadmoor, San Bruno, South San Francisco, and Montara. If you’re just over the line in Moss Beach, call and we’ll tell you what’s possible.
Book Your Gelco Service in Millbrae Today
Call (866) 885-7416 for a free estimate on Gelco cap service in Millbrae. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll look at what you have, show you what we find, and put the price in writing before any work starts.
Written by the team at Chimney Sweep Daly City.