Chimney Repair in San Bruno, CA | Chimney Sweep Daly City

Chimney Repair in San Bruno - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across San Bruno

If your chimney is letting in water, shedding mortar, or pushing smoke back into the room, you’re not alone. San Bruno’s older masonry chimneys take a beating from fog, wind, and long idle stretches between fires, and a lot of them need real structural repair, not just a cleaning. We handle chimney repair across San Bruno, from the flat, foggy streets near Tanforan to the exposed ridgelines above Skyline Boulevard, and we treat the flue liner and crown as seriously as the firebox. Call (866) 885-7416. We answer 24/7, with fast dispatch from 7am to 7pm.

Call (866) 885-7416

Why San Bruno Homeowners Call Chimney Sweep Daly City for Chimney Repair

We’ve built our reputation in San Bruno the slow way: show the homeowner the camera footage, explain what the video actually shows, and recommend only the repair the evidence calls for. That matters in a town where chimneys are old and pushy contractors are common. Homeowners here tell us the same thing – they want someone who’ll say “this can wait” when it can.

San Bruno’s marine-fog climate is different from most of the Peninsula. Chimneys sit damp for longer, which accelerates mortar decay and turns creosote hard and glazed. We’ve learned to expect hidden liner damage on San Bruno homes even when the firebox looks fine.

Our technicians have up to 15 years of experience, and we work only in chimney care – inspection, sweeping, and repair under one roof. The same team that inspects also repairs, so there’s no hand-off between contractors. When you call about a San Bruno chimney, you’re talking to people who know these hillside homes and their exterior masonry chimneys well. Call (866) 885-7416 for a free estimate.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Masonry Repair in San Bruno

Chimney Masonry Repair in San Bruno usually means re-pointing crumbling mortar joints, replacing spalled bricks, and rebuilding a crown that’s cracked and letting water in. On the older stucco homes around Crestmoor and the Burlwood area, the exterior chimney takes the full force of Pacific wind and fog, so the mortar between the bricks erodes long before the firebox shows a problem. A typical masonry repair runs $450 to $1,800 depending on how much brick and mortar is involved; a partial rebuild of the top few courses runs $900 to $2,500. We show you the spalling and the loose joints on camera before anything is quoted.

Re-pointing and Tuckpointing

Tuckpointing grinds out the failed mortar and packs in fresh, properly matched mortar so the joints stop shedding and the brick stops loosening. It’s the right fix when the bricks themselves are sound but the joints between them aren’t. We don’t skip prep – fresh mortar over crumbling joints just falls out again.

Crown Rebuilding and Flashing

A cracked crown lets water straight into the flue, so we rebuild it with a proper slope and overhang and re-seat the flashing where the chimney meets the roof. On older San Bruno homes, the original flashing is often rusted through or pulled loose by wind. Correct flashing is what keeps the roof deck and ceiling dry.

Chimney Cap Installation in San Bruno

Chimney Cap Installation in San Bruno is one of the highest-value jobs we do, because ridgeline chimneys here lose their caps and screens to Pacific winter storms and then take on water and debris all season. A proper stainless cap with a screen keeps rain, birds, and nest material out of the flue and stops downdrafts from pushing smoke back into the house. A standard cap install runs $250 to $650, and a custom cap for an odd-sized or oversized flue runs $450 to $950.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 885-7416

Storm-Damaged Caps and Screens

After a windy winter, exposed chimneys above Skyline Boulevard routinely turn up with ripped screens and caps knocked loose. We replace them with a cap sized and anchored to the actual flue opening, not a one-size generic. A cap that fits right stays put.

Debris in the Crown

When a cap fails, debris and water pack the crown and chimney top, and that trapped moisture promotes spalling brick and cracked mortar. Clearing it and capping properly stops the cycle. If a flue tile has shifted, we check it before reinstalling the cap.

Trusted Brands We Service in San Bruno

Our repair work uses professional-tier chimney products – DuraFlex flexible liner systems for retrofits and re-lining older flues, HeatShield ceramic resurfacing for qualifying clay-tile liners, and Copperfield and Gelco components for crowns, caps, and dampers. These are the same lines certified chimney professionals use, not generic substitutes from a supply house. We don’t claim to stock parts on a truck; product is ordered to the job, which keeps turnaround quick and the fit right. Because the same team inspects, sweeps, and repairs, the material choice matches what the camera actually shows in your flue.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (866) 885-7416

Common Chimney Repair Problems We See in San Bruno Homes

  • Cracked and dislodged clay-tile liners. The 1940s – 1960s homes here have original clay-tile flues that shift and crack as the mortar around them deteriorates in damp air. This gets misdiagnosed as a routine sweep when the tiles have actually come loose.
  • Spalling brick and crumbling joints. The fog belt keeps exterior masonry damp longer than inland Peninsula chimneys, so joints erode and brick faces flake off before the firebox ever looks worn. The expensive damage is often the part you can’t see.
  • Lost caps and debris-packed crowns. Winter storms off the Pacific strip screens and dislodge caps on exposed hillsides, letting water and debris pack the crown and promoting spalling. That trapped moisture works its way down all season.
  • Rusted dampers and downdrafts. Long idle periods leave dampers seized and nests built up, and downdrafts on the older tracts near San Bruno Mountain push smoke back inside even when the flue looks clear from below.

Pricing for Chimney Repair in San Bruno, CA

We quote repair per job from a written estimate, so the numbers below are typical ranges, not a final price. Mortar re-pointing and tuckpointing in San Bruno typically runs $450 to $1,800. Chimney waterproofing runs $300 to $700. Flashing repair runs $350 to $850. A HeatShield liner restoration, which avoids a full reline on a qualifying flue, runs $1,200 to $2,800. A full reline with a DuraFlex system runs $1,900 to $4,500, and a partial crown rebuild runs $900 to $2,500. What moves a quote up is how much brick, liner, or crown is actually involved. Nothing is recommended without camera footage you can watch yourself, and if a repair can safely wait, we’ll say so. The written estimate sets the final price – call (866) 885-7416 for a free estimate.

We Also Serve Cities Near San Bruno

We work the whole north Peninsula, not just San Bruno. Homeowners in Millbrae, South San Francisco, Pacifica, and Brisbane call us for the same inspection-first chimney care, and the fog-belt and storm issues are much the same along this stretch of coast. If you’re in a neighboring town and not sure whether we reach your street, call and we’ll tell you. You can start with our main San Bruno page at San Bruno to see how we work.

Serving San Bruno, CA – Our Local Coverage Area

We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in San Bruno

Why San Bruno Chooses Chimney Sweep Daly City

We set the standard for chimney repair in San Bruno.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in San Bruno

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What San Bruno Customers Say

Trusted by homeowners across San Bruno and surrounding areas.

★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Shane Norris
★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Steven Chen
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Allen Wong

Ready for Chimney Repair in San Bruno?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in San Bruno.

(866) 885-7416

Request a Free Estimate in San Bruno

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7